Manufactured from highest quality T304 grade stainless steel Free flowing system to get the most from the 1.8T 20V engine Designed specifically to fit the Quattro models 4" Exhaust tip to fit the OEM rear valance Noticeably improves throttle response

Manufactured from high quality T304 grade stainless steel Free flowing catalyst replacement to get the most from the 2.0 TFSI 2 piece v-band clamp fitting for a better seal compared to flange & gasket as well as an easier installation Built in flexi joint helps reduce exhaust strain 3" Exhaust Decat Downpipe compatible with VW Golf MK6 GTI 2.0T 2008-2014 models produces superior throttle response compared to the OEM downpipe due to its free flowing design. Add noticeable power and torque gains to your Golf with our 3" Exhaust Decat Downpipe that replaces the OEM cat with a less restrictive

Manufactured from highest quality T304 grade stainless steel. Mandrel bent and fully TIG welded for strength and durability. Designed to improve power and torque across the entire RPM range. Noticeably improves throttle response from your  2.0TSI engine High flow design removes the OEM centre resonator box.     Our 2.5" Exhaust Resonator Delete compatible with Audi S3 8V Quattro 2.0 TSI 13-20 produces a sportier noise from your exhaust by removing the restrictive resonator. Not only will our 2.5" Exhaust Resonator Delete improve the sound, but it will also improve power and torque across the rev range.

Gravity Performance decats are made to completely replace the stock catalytic converter eliminating all restrictions. Our Performance decats improve throttle response and allow for improved exhaust flow increasing power and torque. Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability 3" - 2 x 2" Bore throughout for optimum exhaust flow Built in flexi joint helps reduce exhaust strain Fully polished throughout and designed to fit the OEM exhaust     Our 3" Exhaust Downpipe compatible with Audi TT Mk1 8N 1.8T 225Bhp 98-06 is an ideal replacement for the standard

Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability 3" downpipe to fit most aftermarket exhaust system Built in flexi joint helps reduce exhaust strain Fully polished throughout to compliment the appreciating classic

Manufactured from highest quality T304 grade stainless steel 2" bore throughout with 3.5" tailpipe Free flowing system to get the most out of the great sounding 1.6 engine Mandrel bent and fully TIG welded for strength and durability Noticeably improves throttle response

Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Built in 200cpi non type approved sports cat Reduces down to 60mm to sleeve clamp up to the rest of the OEM system More free flowing to allow for decreased turbo lag and increased power capacity  

2.5" Bore Throughout With 3" Tailpipe A free flowing exhaust is a great way to get the best out of the R56 and R57 Resonated system to reduced unwanted exhaust drone while retaining its sporty growl Manufactured from Mandrel bent T304 grade stainless steel with full TIG welding for strength and durability Engineered to improve throttle response and increased power and torque across the entire RPM range

Manufactured from highest quality T304 grade stainless steel 3" bore with twin 3" tailpipes Mandrel bent and fully TIG welded for strength and durability CNC machined V band flanges for a solid support and an accurate fit Designed to improve power and torque across the entire RPM range

Manufactured from highest quality T304 grade stainless steel, mandrel bent and fully TIG welded for strength and durability. CNC machined flanges for strong solid support and an accurate fit, designed to improve power and torque across the entire RPM range. Noticeably improves the throttle response of your BMW 3-Series. One of the most cost effective ways of releasing power from your 330D M57 Engine.     2.5" Exhaust Decat Downpipe compatible with BMW 3 Series E46 330d M57 99-05, made from T304 Stainless Steel, is a free flowing part which improves throttle response. Our 2.5" Exhaust Decat Downpipe is a

3" Bore Throughout With a Twin 4.5" Tailpipes 4.5" Tailpipes designed to fit the oem rear valance Manufactured from Mandrel bent T304 grade stainless steel Engineered to improve throttle response and increased power and torque across the entire RPM range A free flowing exhaust is a great way to get the best out of the 4 cylinder Turbo engine

Gravity Performance decats are made to completely replace the stock catalytic converter eliminating all restrictions. Our Performance decats improve throttle response and allow for improved exhaust flow increasing power and torque. Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing catalyst replacement to get the most from the 2.0 TDI Designed to improve power and torque across the entire RPM range     2.25" Exhaust Decat Downpipe compatible with Audi A3 8P 2.0 TDI 2003 - 2013,  Made from High Quality Stainless steel, this Decat Downpipe will Drastically increase

Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Non type approved 200cpi sports cat built in Designed to be a direct fit for the OEM system Reduces turbo lag and increases power capabilities

Manufactured from highest quality T304 grade stainless steel Free flowing to get the most from the 2.0L M47 engine 60mm bore all the way through for optimum exhaust flow Built in flexi joint helps reduce exhaust strain

2.5" Bore throughout with twin 2.5" tailpipes Designed to fit the OEM tailpipes moulded into the bumper Manufactured from mandrel bent T304 grade stainless steel Engineered to improve throttle response and increase power and torque across the entire RPM range A free flowing exhaust is a great way to get the best out of the 4 cylinder engine

Manufactured from highest quality T304 grade stainless steel Free flowing to get the most from the 4 cylinder 1.8L and 2.0L engines CNC machined flanges to fit the OEM exhaust system and most aftermarket backboxes Fully polished with a 60mm bore size throughout Sold for off road and track use only

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability CNC machined flanges for strong, solid support and an accurate fit Direct replacement for the OEM manifolds No catalytic material so will flow much better and allow for more power

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Designed to be a direct replacement for the original catalytic converter Significantly improves throttle response and power Built in non type approved 200cpi sports cat This is a non type approved CAT and as such will not pass an MOT so is sold for off road use only.

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing catalyst replacement to get the most from the 1.8T 20V engine Designed to improve power and torque across the entire RPM range

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing 4-1 tubular design with no restriction on exhaust flow Fully polished and an supplied with the necessary gaskets  2.25" collector to match the OEM exhaust system

Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing catalyst replacement to get the most from the 1.4TSI engine Designed to improve power and torque across the entire RPM range

Manufactured from highest quality T304 grade stainless steel Removes the restrictive catalytic converter from the exhaust - improving gas flow CNC machined flanges for strong, solid support and an accurate fit Designed to improve power and torque across the entire RPM range 4-2-1 design to improve the scavenging effect - increasing power

3" Bore throughout with twin 2.75" tailpipes Tailpipes designed to fit into the OEM Valance Cast Y-piece offering smoother exhaust flow and maximising strength and durability Manufactured from Mandrel bent T304 grade stainless steel and CNC machined V-Band fittings with full TIG welding for strength and durability Engineered to improve throttle response and increased power and torque across the entire RPM range

A free flowing exhaust is a great way to get the best power and sound out of the 2.5TD engine 2.5" bore with 2.5" tailpipe Manufactured from Mandrel bent T304 grade stainless steel Direct replacement for the stock exhaust Built in flexi to help reduce strain on the system and prolong gasket life