Manufactured from highest quality T304 grade stainless steel Directly replaces the original manifold - gaskets and bolts included CNC machined flanges for strong, solid support and an accurate fit 4-2-1 to maximise the scavenging effect Designed to increase power at the mid-top rev range

Manufactured from highest quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Built in 200cpi non type approved sports cats Designed to bolt up to the OEM system Designed to reduce turbo lag and increase horsepower capacity This is a non type approved CAT and as such will not pass an MOT so is sold for off road use only.

2.25" Bore throughout with a 3.5" Tailpipe Tailpipe designed to fit into the OEM Valance Fits from the catalytic converter back Cat back system designed to get the most from the 1.2 + 1.4 TSI engines Engineered to improve throttle response and increased power and torque across the entire RPM range

2.75" Bore Throughout with Triangular 2.75 Tailpipe Triangular Tailpipe designed to fit into the OEM Valance Resonated system to reduced unwanted exhaust drone while retaining its sporty notes Manufactured from Mandrel bent T304 grade stainless steel Engineered to improve throttle response and increased power and torque across the entire RPM range

Manufactured from highest quality T304 grade stainless steel, mandrel bent and fully TIG welded for strength and durability. CNC machined flanges for strong, solid support and an accurate fit, designed to improve power and torque across the entire RPM range. Noticeably improves the throttle response from the 1.9TDI engine. One of the most cost effective ways of releasing power from your diesel engine.     The 2.25" Exhaust Decat Downpipe compatible with VW Bora 1.9TDI 99-06 offers performance gains and reliability with its TIG welding and CNC machined flanges. unlock the 1.9TDI's performance capabilities with our free flowing 2.25" Exhaust

Manufactured from highest quality T304 grade stainless steel 200 Cell Catalyst replacement to get the most from the turbo engine Unlock more from the 4 cylinder turbo engines 200CPI Non type approved sport cat built in Sold for off road and track use only

Gravity Exhaust Systems are designed and manufactured to enhance the sound, appearance and most importantly, the performance of your vehicle. All systems are designed in house using the OEM mounting points to ensure smooth fitment every time. Manufactured from highest quality T304 grade stainless steel Free flowing cat back system Improved exhaust note Fully polished exhaust tip Designed to improve power and torque across the entire RPM range

CNC machined flanges for strong, solid support and an accurate fit Designed to improve power and torque across the entire RPM range Free flowing to get the most from the 5 cylinder turbo powerplant Built in flexi joint helps reduce exhaust strain Sold for off-road / track use only

2.75" Bore throughout with quad 4" tailpipes Turbo back decat system removing all exhaust restrictions A complete upgrade kit to to a full stainless steel system Manufactured from Mandrel bent T304 grade stainless steel Engineered to improve throttle response and increased power and torque across the entire RPM range

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Designed to improve power and torque across the entire RPM range Free flowing to get the most from the 2.5L N53 engines Sold for off-road / track use only

Gravity Performance decats are made to completely replace the stock catalytic converter eliminating all restrictions. Our Performance decats improve throttle response and allow for improved exhaust flow increasing power and torque. Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing catalyst replacement to get the most from the B16 engine Built in flexi joint helps reduce exhaust strain

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing DPF replacement to get the most from the engine Designed to improve power and torque across the entire RPM range  

Manufactured from highest quality T304 grade stainless steel. 2.25" bore throughout with 2.5" tailpipe. Mandrel bent and fully TIG welded for strength and durability. CNC machined flanges for strong, solid support and an accurate fit. Designed to improve power, torque and throttle response across the entire RPM range.

Gravity Performance exhaust systems are designed in house to fit OEM mounting points for perfect fitment. Our Gravity Performance exhausts enhance the sound of your car with a captivating exhaust note while also increasing performance. Manufactured from high quality T304 grade stainless steel Dual exit tips designed to fit the OEM rear diffuser Mandrel bent and fully TIG welded for strength and durability A free flowing exhaust is a great way to get the best out of the 2.0 litre diesel engine Designed to improve power and torque across the entire RPM range

This Stainless Steel Downpipe DPF Delete and Decat is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 1.6 / 2.0 TDi VW Golf Mk7 Platform Vehicles. Gravity Performance DPF Deletes instantly increase power by allowing exhaust gasses to exit the vehicle quicker. The internal welded U-Bend helps increase the flow of exhaust gases, ideal for tuned vehicles: Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Free flowing DPF replacement to get the most from the diesel engine Designed to improve power and torque across the

2.5" bore throughout for maximum gas flow A free flowing exhaust is a great way to get the best out of the Transporter's 2.5TDI engine Manufactured from mandrel bent T304 grade stainless steel and CNC machined Flanges with full TIG welding for strength and durability Replaces everything from the catalytic converter backwards Twin downward tip to match the OEM look

Gravity Exhaust centre sections are designed in house using the OEM mounting points to ensure smooth fitment every time. Using the highest quality T304 stainless steel for performance and durability. Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability CNC machined flanges for strong, solid support and an accurate fit Designed to improve power and torque across the entire RPM range Please note fitting instructions are?NOT?included

Manufactured from high quality T304 grade stainless steel Mandrel bent and fully TIG welded for strength and durability Maximise the power from your Porsche 986 with our full system including manifolds, decats, link pipes and the backbox. Designed to improve power, torque and throttle response across the entire RPM range

Manufactured from highest quality T304 grade stainless steel Free flowing catalyst replacement to get the most from the SR and RB powerplants Fully polished with a 3" bore all the way through 315mm in length, from flange to flange Built in silencer to reduce noise levels by up to 15db

Gravity Exhaust Systems are designed and manufactured to enhance the sound, appearance and most importantly, the performance of your vehicle. All systems are designed in house using the OEM mounting points to ensure smooth fitment every time. Manufactured from highest quality T304 grade stainless steel Free flowing cat back system Improved exhaust note metered at 81.4 decibels Fully polished 3.5 inch exhaust tip Designed to improve power and torque across the entire RPM range

Manufactured from highest quality T304 grade stainless steel. 2.25" bore throughout with 4" tailpipe. Mandrel bent and fully TIG welded for strength and durability. CNC machined flanges for strong, solid support and an accurate fit. Designed to improve power, torque and throttle response across the entire RPM range.

Manufactured from highest quality T304 stainless steel 4-2-1 design provides more bottom end power than equivalent 4-1 manifolds Direct bolt on design for ease of fitment Great upgrade to replace an existing corroded or restrictive manifold Looks great in the engine bay

Manufactured from highest quality T304 grade stainless steel 4-2-1 design to maximise the scavenging effect to improve gas flow CNC machined flanges for strong, solid support and an accurate fit Designed to improve power and torque across the entire RPM range Direct replacement for the original. One gasket included

Gravity Exhaust Systems are designed and manufactured to enhance the sound, appearance and most importantly, the performance of your vehicle. All systems are designed in house using the OEM mounting points to ensure smooth fitment every time. Manufactured from highest quality T304 grade stainless steel Dual exit tips designed to fit the OEM rear diffuser Designed to be a direct replacement for your original system Engineered to improve throttle response and increase power and torque across the entire RPM range A free flowing exhaust is a great way to get the best out of the 4 cylinder engine